Welcome to
Green River Community College's
Carpentry Technology Program
Where students gain skills and knowledge in which they can "build" a rewarding career upon!
Program Description
Class Schedules
Instructor Information
Project House Photos
Required Tools & Supplies
Carpentry Links
GRCC Homepage
Faculty Homepages
Residential and Light Commercial
Carpentry Program
Tool & Supply List
REQUIRED INSTRUCTIONAL MATERIALS FOR CARP 101.1, 102.1, AND 103.1
| TEXTS | ||
| Needed to begin program | ||
| 1 copy | CARPENTRY - KOEL | |
| 1 copy | CARPENTRY WORKBOOK - KOEL | |
| 1 copy | CONSTRUCTION MASTER PRO v3.0 | |
| CLASSROOM AND CONSUMABLE SUPPLIES | ||
| 2 each | Pencils and pens | |
| 1 only | Large 3 ring binder (2-2 ½ Thick) with subject dividers | |
| 1 only | College ruled small spiral notebook | |
| 1 only | College ruled spiral notebook, with 1/4 graph paper | |
| 2 only | Pink pearl eraser | |
| TOOLS AND EQUIPMENT FOR EACH QUARTER* | ||
| 1 only | Construction Master Pro. Ver 3.0 |
 |
| *1 only | Tool belt | |
| *1 only | 16-22 oz framing hammer |
 |
| *1 only | Speed square |
 |
| *1 only | Utility Knife |
 |
| *1 only | 25 x 1 Tape measure |
 |
| *1 only | Chalk Line |
 |
| *1 only | Linesman pliers |
 |
| *1 only | Nail puller (cats paw) |
 |
| *2 each | Carpenter pencils |
 |
| *The above set will be loaned to 1st quarter students. All tools MUST be returned in good condition at the end of the 1st quarter. If tools are lost or damaged, a fine will be placed on students transcripts for retail cost replacement of tool(s). | ||
| TOOLS AND EQUIPMENT FOR WINTER QUARTER | ||
| 1 set | All tools listed under first quarter | |
| 1 each | Framing square with rafter tables |
 |
| 1 each | Ripping chisel |
 |
| TOOLS AND EQUIPMENT FOR SPRING QUARTER | ||
| 1 set | All tools listed under Basic Tools | |
| 1 only | Coping saw with fine tooth blades |
 |
| 1 only | Small brass scribe |
 |
| 1 set | 1/2 34 1 1 1/2 Wood chisels |
 |
| 1 only | 10-12 point handsaw |
 |
| 1 only | 24-48 level 3 vials |
 |
| 1 set | Nail set 2/32 3/32 and 4/32 |
 |
| 1 only | Multi-tip screwdriver (with both slot and Phillips bits) |
 |
| 1 only | Sliding T-Bevel |
 |
| 1 only | Combination square 1 x 12 blade |
 |
| 1 only | 16oz Finish Hammer |
 |
| PERSONAL PROTECTIVE EQUIPMENT (PPE) | ||
| 1 only | Safety glasses (ANSI approved)** | |
| 1 only | Hearing protection (ANSI approved)** | |
| 1 only | Hard hat (ANSI approved)** | |
| 1 pair | Cotton or leather work gloves | |
| 1 set | Rain gear. Pants and jacket | |
| 1 pair | Work boots. Safety toe required (ANSI approved) | |
| 1 pair | Rubber boots. Pull on style, no laces | |
| 1 each | INDIVIDUAL MEDICAL INSURANCE. MUST SHOW PROOF TO INSTRUCTOR. CAN BE PURCHASED THROUGH THE COLLEGE | |
| ** Provided by college. Program will provide up to 2 pair safety glasses. Replacement lens will be made available at no charge | ||
| TOOLS REQUIRED FOR EMPLOYMENT | ||
| 1 only | 12 Adjustable Wrench | |
| 1 only | 6' Level | |
| 1 only | 100 Dry Line | |
| 1 only | 7 1/4 Circular Saw | |
| 1 only | 100 14 Ga. Extension Cord | |
| TRANSPORTATION: | ||
| Students must provide their own transportation to and from job site. | ||
| NOTE: You will be required to have the basic books, tools and protective gear on hand through out your training here at the college. | ||
 Associate Member of Master Builders Association of King and Snohomish Counties |
Green River Community College
| Carpentry Program - MS TI | 12401 SE 320th St. | Auburn, WA 98092-3699 (253) 833-9111 Auburn | (206) 464-6133 Eastside | (253) 924-0180 Tacoma | Fax: (253) 924-3462 © 2006 Last Updated 2/27/06| For questions about this program or website please contact Glen Martin. This site is best viewed with IE 4.0 or above at 800 X 600 screen resolution. |